Tintable Primer/Sealer

Tintable Primer/Sealer is a perfect undercoat for deep-toned interior or exterior topcoats. Use on most outdoor substrates including non-staining wood, sheetrock, and fiber cement. It is a great choice for new construction or for recoating commercial, multi-family, and residential homes. Not suitable for bare metal surfaces.

  • Excellent Penetration and Seal
  • Suitable for most exterior substrates
  • Undercoat for exterior deep toned color

TDSTDS (Español) | SDS

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 250-400 square feet per gallon.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 3 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit millerpaint.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediatley with warm soapy water. Follow with a clear rinse.

Your Satisfaction Guaranteed: Miller Paint warrants satisfactory results if used according to label directions. If not satisfied, return the unused portion to place of purchase with a sales receipt. Material will be replaced or purchase price will be refunded. Since we have no control over surface preparation or application, THIS WARRANTY DOES NOT INCLUDE LABOR, THE COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH USE OF THIS PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so the limitation or exclusion contained in the above warranty may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from
state to state.

The contents of this can should be well stirred or boxed by pouring from one can to another to assure color uniformity. More than one can of the same color should be mixed together as you progress with your work. Check color before painting, not responsible for application of wrong shade. Custom colors are not returnable.