HP Max

HP Max is a durable, water-based cross-linked acrylic urethane coating. It has excellent adhesion to a variety of properly prepared surfaces, and exhibits outstanding scrub-resistance for the painted substrate. HP Max is perfect for surfaces such as interior/exterior doors, trim, woodwork, foot-traffic floors, cabinetry, and properly prepared ferrous and non-ferrous metals. The finished surface will be highly resistant to hand-oils, and is able to withstand repeated cleaning. Helps to inhibit the growth of mold and mildew, making it a choice finish for moisture-rich environments.

  • High Quality Acrylic Urethane
  • Superior Wash and Scrub Resistance
  • Interior/Exterior
  • Hand Oil Resistant
  • Moderate Foot Traffic

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

Find Your Local Store

SHEENS

Eggshell

Ideal for projects where a deep, rich look is desired yet only a minimal sheen is needed. Also applicable for commercial or residential projects that require minimal washability such as conference rooms, living rooms, or bedrooms.

TDS | SDS

Satin

This finish will minimize dirt pick-up and is washable. With the hard finish of an enamel, a satin finish can also be used on interior walls where a strong, durable moisture resistant surface is needed. Best used when the surface is free of major imperfections. Use in applications such as interior primed smooth or rough walls, exterior or interior finish grade wood trim, or primed metal surfaces.

TDS | SDS

Semigloss

This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease, and moisture. Use in applications such as institutional walls, trim, and wet areas, exterior or interior doors, exterior or interior finish grade wood trim, or primed metal surfaces.

TDS | SDS

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 300-400 square feet per gallon.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 2 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit millerpaint.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 45°F or when temperatures are expected to drop below 45°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse.

Specifications for HP Max
Volume Solids 34% 34% 34%
VISCOSITY 95-102 KU 95-102 KU 95-102 KU
Weight Per Gallon 10 (LB) 10 (LB) 10 (LB)
Gloss 6 - 9% @ 60°

8-20% @ 85°

 		20-25% @ 60°

30-40% @ 85°

 		40-45% @ 60°

60-70% @ 85°
VOC* (minus water) <50 g/L <50 g/L <50 g/L
Download Sellsheet

Related products