Evolution

Evolution Interior has been formulated with an advanced resin system for enhanced performance. With superior coverage and exceptional hide, you can feel the smooth, luxurious finish of Evolution Interior with every brushstroke. Combined with excellent splatter and stain resistance, Evolution Interior is the top choice for homeowners and professional alike. Make your home a part of our legacy with Evolution, Our Finest Paint. Available in Matte Finish, Soft Sheen, Satin Cabinet & Trim, and Semigloss Cabinet & Trim.

  • Advanced acrylic resin system
  • Superior coverage
  • Exceptional hide
  • Smooth, highest quality finish
  • Excellent splatter and
 stain resistance
  • Superior washability and easy clean up


For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

Find Your Local Store

SHEENS

Matte Finish

Our finest interior coating enhanced with Ceramic Technology for use on walls where a durable flat finish is desired. The matte finish offers the minimal light reflection of a flat with increased washability. Also a great choice or use on walls with uneven surfaces.

TDS | SDS 

TDS(Español)

Soft Sheen

Our superior quality, thick & creamy, durable wall coating will minimize dirt pick-up and is washable. Ideal for projects where a deep, rich look and some sheen and washability are desired.

TDS | SDS

TDS(Español)

Satin Cabinet & Trim

This unique, silky texture captures and reflects deeper tones and richer hues. Formulated for application on doors, cabinets and trim, this is superb choice when working on high traffic surfaces. This durable coating resists blocking and stains while providing all of the elegance of the COLOR EVOLUTION Collection.

TDS | SDS

TDS(Español)

Semigloss Cabinet & Trim

Evolution Interior Semigloss Trim is our finest coating for use on doors, trim, and cabinets where a durable semi-gloss finish is desired. The semi-gloss finish offers exceptional durability, resistance to dirt pick-up, and washability.

TDS | SDS

TDS(Español)

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 350 to 400 square feet per gallon. Two coats recommended. Coverage depends on porosity and profile of surface and can be less when making a significant change in color.

  • icons_0002_Vector-Smart-Object

    Drying Time

    30 minutes to touch, 2 hours to recoat, at 70°F and 50% relative humidity

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit millerpaint.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse.

The contents of this can should be well stirred or boxed by pouring from one can to another to assure color uniformity. More than one can of the same color should be mixed together as you progress with your work. Check color before painting, not responsible for application of wrong shade. Custom colors are not returnable.

Your satisfaction with Miller Paint products is guaranteed. Learn more at millerpaint.com/promise.

Download Sellsheet
SHEEN

PAPER, CANVAS, SILK, GLASS, SATIN, SEMIGLOSS

Related products